Types of stamps – What’s the difference? #photopolymerstamps #StampinUp

Since the creation of the newest type of stamps, photopolymer, I’ve found myself explaining this difference more often.  Some of Stampin Up’s newest stamps only come out in photopolymer, some come out in clear and photopolymer, and some come in all three types, including the wood mount.

When I first started stamping many years ago, I was only familiar with the wood mount as that was what I saw the most in Michaels and hadn’t been exposed to anything else.  Today, as you can easily see in any craft store, or online, and especially with our stamps from Stampin Up, many of the stamps no longer come in a wood mount.

Before I talk about the pros and cons of each type, in my opinion, I’ll run through the three types.

  1. Rubber – Found on a wood mount block.  It is a rubber material and you adhere it or perhaps you purchase it already adhered to a wood block.  It is forever attached to that block.
  2. Clear – These stamps are also of a rubber material, not really “clear” in nature, but do attach to a clear acrylic block for use.  Therefore, in Stampin Up, we call them clear, because they require a clear block.
  3. Photopolymer – These are a completely “clear” stamp that also requires a clear block and you can see through the stamp and block which allows you to see exactly where it is being stamped.  These stamps are a clingy, bendy material so can be manipulated on the clear block to take different forms, if the stamp allows for it and they stamp with a suction to the paper and can have air bubbles if not stamped properly.  Best stamped on a softer surface, in a downward motion and then peeled off the paper in a reverse motion.  Watch for a future post with video explaining this stamping technique.  IMG_4839Here is a photo of all three stamps side by side. L-R Wood mount rubber, clear and photopolymer

Pros and Cons of each of the three types:

Wood Mount Stamps (Rubber)

Pros – do not have worry about having a block to fit or keeping track, easily transportable, long lasting

Cons – take up a lot more space to store, more expensive, heavier to transport, can appear “dirty” if ink gets on the wood, can’t see through them

See below a side view of the Hardwood background stamp on the wooden block.

IMG_4840

Clear Stamps (Rubber)

Pros – Cheaper than wood mount but same good quality of stamp, light and small storage, easily transportable

Cons – Can be difficult to keep attached to the blocks at times, especially depending on size of the stamp, there are numerous ideas out there about how to keep them attached and can’t see through them

See below a side view photo of my Deck the Halls stamp from the Carols of Christmas stamp set.

IMG_4842

Photopolymer Stamps

Pros – Completely clear so can best see where you are stamping. Light storage, cheaper than wood, and easily transportable.  Attach really well to the blocks, pretty much suction to them.  Easily removable and can be manipulated to reshape, if the size of the stamp allows it.  

Cons – can get air bubbles if you don’t know who to best stamp them. Do stain from ink use so may appear “dirty” to the owner but the quality of the stamp is not at all damaged.    Do stick easily to things so be sure to put them away so as not to lose them.  

Below you will see a side view photo of the skater in the Talented Trio stamp set.  

IMG_4843

As more and more of the new stamps come out only in the photopolymer, I had started to question if perhaps the clear mount rubber stamps would be phased out.  However, there does not seem to be any sign of that actually happening.  I’ll be honest, the photopolymer are my favourite, mostly because they stick so well, and you can see through completely.  I feel like have more control over what I’m doing with them.  I know many will agree with me since many of my customers have shared this same feeling.  They will even get frustrated when they like a stamp set and it doesn’t come out in photopolymer.  I do still like the clear stamps, I do not avoid them, per se, but will always chose the photopolymer over the clear.  

Here are the supplies from these photos:

What are your thoughts?  What is your favourite? Would love to hear some feedback 🙂 Thanks!

#yourstampinscrapbooker

Happy Friday!

Product List

Talented Trio Photopolymer Stamp Set

Talented Trio Photopolymer Stamp Set
[138750]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s